MONO莫諾螺桿泵 Merlin 工業泵系列產品
MONO莫諾螺桿泵 Merlin 工業泵系列產品沿用已久和經受考驗的泵設計，
Merlin 工業泵系列提供給您一款經濟和緊湊型號，
有內置模塊靈活性并提供免注?；蜃⒛Ｉ山饘俣ㄗ?。
一個可拆式密封壓蓋，具有機械密封和整體密封選項，可方便接近和互換。
容量 壓力 溫度
立方米 / 小時 可達 61bar 可達 10°C-10 到 100
加侖 / 分鐘 可達 268psi 可達 145°F14 到 212
點擊快速查看以下內容
MONO莫諾螺桿泵 特性與優點 MONO莫諾螺桿泵 Merlin 工業泵系列 性能
MONO莫諾螺桿泵 Merlin 工業泵系列 Cast Iron and Stainless Steel Models
MONO莫諾螺桿泵 Applications
應用
| 聚合電解液 |
石灰 |
| 酸 |
原污水 |
| 碳泥 |
分類污泥 |
| 過濾壓制淤渣 |
硫酸鋁 |
| 礦井水 |
煤泥 |
| 磷酸 |
礬 |
| 苛性堿溶液 |
汽油 |
| 柴油 |
乙二醇 |
| 粘土漿 |
二氧化鈦 |
| 膨潤土漿 |
乳膠 |
| 淀粉 |
陶瓷漿 |
MONO莫諾螺桿泵 特性與優點
- 平穩的抽吸動作最大程度地減小泵送產品的剪切和擠壓損壞
- 自吸泵并能在各個方向上運行
- 緊湊和堅固的設計令其性能耐久可靠nce
- 結構簡單維修便利
- 可將吸入腔旋轉 90??以便于安裝
- 剪切敏感和粘度物料、懸浮固體、磨蝕料和氣體、液體和固體混合物的理想設備
- 可提供符合 ATEX 指令 94/9/EC 的泵
- 點擊返回頂層
MONO莫諾螺桿泵 Merlin 工業泵系列 性能
點擊返回頂層
Cast Iron and Stainless Steel Models
NOTES
1. The tabulated performance data is based upon handling clean water at 20°C using a natural rubber stator grade A.
2. ABS kW = Absorbed power on pump operation.
3. For guidance in selecting a pump for use with other fluids of varying abrasion and viscosity refer to
Mono Pumps Ltd., Audenshaw, Manchester.
4. For F & G Builds use H performance details under Model No.
Bareshaft Pump Dimensions
|
|
Diagram 1. Models AA, AB, AC & AE.
Typical Builds H and M.
Cast Iron and Stainless Steel
|
 |
|
Diagram 2. Models AA, AB, AC & AE.
Typical Build F.
Cast Iron only.
|
 |
|
Diagram 3. Models AA, AB, AC & AE.
Typical Builds G and N.
Cast Iron only
|
 |
|
Diagram 4. Models AF, Build H and AG Build M.
Cast Iron and Stainless Steel.
|
|
|
Diagram 5. Models AF, Build G and AG Build N.
Cast Iron only.
|
 |
|
Foundation Fixing Details |
NOTES:
1. All dimensions are in millimetres unless otherwise stated and are for guidance only. For full certified drawings refer to Mono Pumps Ltd.
2. On models AA AB AC AE and AF cast iron flanges are to BS EN 1092 25/11 and stainless steel flanges are to BS EN 1092 25/1.
On models AG only cast iron flanges are to BS 4505 16/11 and stainless steel flanges are to BS EN 1092 16/1.
3. Shaft diameters are to BS 4506: 1970 and keyways to BS 4234 Part No. 1/ISO R773.
4. SOG refers to pump suction at the gland or drive end of the pump. DOG refers to pump delivery at the gland or drive end of the pump.
5. E & E1 refer to hold down bolt sizes.
點擊返回頂層
Liquid PVC
A CAE12H193 pump installed on a tile production line to pump liquid
PVC backing at 300 kg/h from storage vessels to the coating heads.
The low speed Merlin pump has a gentle conveying action to ensure the
integrity of the shear sensitive PVC coating and enable the liquid PVC to
be delivered to the coating heads at a constant flow rate, crucial to
obtaining an even coating.
Chemicals
A manufacturer of industrial hygiene cleaning products is using a Merlin
pump for chemical transfer and tanker loading duties. As some
chemicals can have a viscosity as high as 2,000 cP and be shear
sensitive, the progressing cavity pumping principle produces a low
shear pumping action to maintain product integrity and prevent
foaming.
Raw Sewage
The combination of a Merlin pump and Mono macerator provides a highly
effective pumping and macerating system. This unit is installed in a rural
outhouse to transfer sewage at a capacity of 15m3/h to the main sewage
system. Situated above a well that collects raw sewage from local
cottages, the suction of the Merlin pump lifts the sewage from the well and
into the macerating chamber. The positive displacement action offers the
benefits of blockage-free operation and smooth transfer of the sewage
through small bore pipes into the main sewer.
Cattle Slurry
This CAB22H1R3 pump is part of a system to distribute the liquid from
cattle slurry over farm fields. Handling a capacity of 3000 l/h, the pump
is connected to pulser devices situated in various fields up to 1000m
away. The pulser is fitted with a bladder accumulator, which discharges
the liquid when the pressure reaches 71/2 bar.
點擊返回頂層
MONO莫諾螺桿泵 Merlin 工業泵系列產品相關咨詢歡迎您的來電
